View TGL34-10_4113224.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TGL34-6.8 ... TGL34-200CA
TGL34-6.8 ... TGL34-200CA
Surface mount unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden fur die Oberflachenmontage Version 2006-01-07 Peak pulse power dissipation Maximale Verlustleistung
1.6
150 W 6.8...200 V DO-213AA 0.04 g
Nominal breakdown voltage Nominale Abbruch-Spannung
0.4
Plastic case MiniMELF - Kunststoffgehause MiniMELF Weight approx. - Gewicht ca. Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle
3.5
Dimensions - Mae [mm]
Marking: Kennzeichnung:
For bidirectional types (add suffix "C" or "CA"), electrical characteristics apply in both directions. Fur bidirektionale Dioden (erganze Suffix "C" oder "CA") gelten die elektrischen Werte in beiden Richtungen.
Maximum ratings and Characteristics Peak pulse power dissipation (10/1000 s waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 s) Steady state power dissipation Verlustleistung im Dauerbetrieb Peak forward surge current, 60 Hz half sine-wave Stostrom fur eine 60 Hz Sinus-Halbwelle Max. instantaneous forward voltage Augenblickswert der Durchlass-Spannung Junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss TA = 25C TA = 75C TA = 25C IF = 10 A
0.4
One blue ring denotes "cathode" and "TVS-Diode family" The type numbers are noted only on the label on the reel Ein blauer Ring kennzeichnet "Kathode" und "TVS-Dioden-Familie" Die Typenbezeichnungen sind nur auf dem Rollenaufkleber vermerkt
Grenz- und Kennwerte PPPM PM(AV) IFSM VF Tj TS RthA RthT 150 W 1) 1 W 2) 20 A 3) < 3.5 V 3) -50...+150C -50...+150C < 75 K/W 2) < 40 K/W
1 2 3
Non-repetitive pulse see curve IPP = f (t) / PPP = f (t) Hochstzulassiger Spitzenwert eines einmaligen Impulses, siehe Kurve IPP = f (t) / PPP = f (t) Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschluss Unidirectional diodes only - Nur fur unidirektionale Dioden http://www.diotec.com/
(c) Diotec Semiconductor AG
1
TGL34-6.8 ... TGL34-200CA Maximum ratings
Type Typ Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM
Grenzwerte
Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 s)
VBR [V] TGL34-6.8 TGL34-6.8A TGL34-7.5 TGL34-7.5A TGL34-8.2 TGL34-8.2A TGL34-9.1 TGL34-9.1A TGL34-10 TGL34-10A TGL34-11 TGL34-11A TGL34-12 TGL34-12A TGL34-13 TGL34-13A TGL34-15 TGL34-15A TGL34-16 TGL34-16A TGL34-18 TGL34-18A TGL34-20 TGL34-20A TGL34-22 TGL34-22A TGL34-24 TGL34-24A TGL34-27 TGL34-27A TGL34-30 TGL34-30A TGL34-33 TGL34-33A TGL34-36 TGL34-36A TGL34-39 TGL34-39A 6.8 10% 6.8 5% 7.5 10% 7.5 5% 8.2 10% 8.2 5% 9.1 10% 9.1 5% 10 10% 10 5% 11 10% 11 5% 12 10% 12 5% 13 10% 13 5% 15 10% 15 5% 16 10% 16 5% 18 10% 18 5% 20 10% 20 5% 22 10% 22 5% 24 10% 24 5% 27 10% 27 5% 30 10% 30 5% 33 10% 33 5% 36 10% 36 5% 39 10% 39 5% 6.12...7.48 *) 6.45...7.14 *) 6.75...8.25 *) 7.13...7.88 *) 7.38...9.02 *) 7.79...8.61 *) 8.19...10.0 8.65...9.55 9.0...11.0 9.5...10.5 9.9...12.1 10.5...11.6 10.8...13.2 11.4...12.6 11.7...14.3 12.4...13.7 13.5...16.5 14.3...15.8 14.4...17.6 15.2...16.8 16.2...19.8 17.1...18.9 18.0...22.0 19.0...21.0 19.8...24.2 20.9...23.1 21.6...26.4 22.8...25.2 24.3...29.7 25.7...28.4 27.0...30.0 28.5...31.5 29.7...36.3 31.4...34.7 32.4...39.6 34.2...37.8 35.1...42.9 37.1...41.0
VWM [V] 5.5 5.8 6.0 6.4 6.6 7.0 7.3 7.7 8.1 8.5 8.9 9.4 9.7 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3
ID [A] 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
VC [V] 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9
IPPM [A] 13.9 14.3 12.8 13.3 12.0 12.4 10.9 11.2 10.0 10.3 9.3 9.6 8.7 9.0 7.9 8.2 6.8 7.1 6.4 6.7 5.7 6.0 5.2 5.4 4.7 4.9 4.3 4.5 3.8 4.0 3.4 3.6 3.1 3.3 2.9 3.0 2.7 2.8
2
http://www.diotec.com/
(c) Diotec Semiconductor AG
TGL34-6.8 ... TGL34-200CA Maximum ratings
Type Typ Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM
Grenzwerte
Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 s)
VBR [V]
TGL34-43 TGL34-43A TGL34-47 TGL34-47A TGL34-51 TGL34-51A TGL34-56 TGL34-56A TGL34-62 TGL34-62A TGL34-68 TGL34-68A TGL34-75 TGL34-75A TGL34-82 TGL34-82A TGL34-91 TGL34-91A TGL34-100 TGL34-100A TGL34-110 TGL34-110A TGL34-120 TGL34-120A TGL34-130 TGL34-130A TGL34-150 TGL34-150A TGL34-160 TGL34-160A TGL34-170 TGL34-170A TGL34-180 TGL34-180A TGL34-200 TGL34-200A 43 10% 43 5% 47 10% 47 5% 51 10% 51 5% 56 10% 56 5% 62 10% 62 5% 68 10% 68 5% 75 10% 75 5% 82 10% 82 5% 91 10% 91 5% 100 10% 100 5% 110 10% 110 5% 120 10% 120 5% 130 10% 130 5% 150 10% 150 5% 160 10% 160 5% 170 10% 170 5% 180 10% 180 5% 200 10% 200 5% 38.7...47.3 40.9...45.2 42.3...51.7 44.7...49.4 45.9...56.1 48.5...53.6 50.4...61.6 53.2...58.8 55.8...68.8 58.9...65.1 61.2...74.8 64.6...71.4 67.5...82.5 71.3...78.8 73.8...90.2 77.9...86.1 81.9...100 86.5...95.5 90.0...110 95.0...105 99.0...121 105...116 108...132 114...126 117...143 124...137 135...165 143...158 144...176 152...168 153...187 162...179 162...198 171...189 180...220 190...210
VWM [V] 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171
ID [A] 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
VC [V] 61.9 59.3 67.8 64.8 73.5 70.1 81 77 89 85 98 92 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274
IPPM [A] 2.4 2.5 2.2 2.3 2.0 2.1 1.9 1.9 1.7 1.8 1.5 1.6 1.4 1.5 1.3 1.3 1.1 1.2 1.0 1.1 0.9 1.0 0.9 0.9 0.8 0.8 0.7 0.7 0.7 0.7 0.6 0.6 0.6 0.6 0.5 0.5
For bidirectional types (suffix "C" or "CA"), electrical characteristics apply in both directions. Fur bidirektionale Dioden (Suffix "C" oder "CA") gelten die elektrischen Werte in beiden Richtungen.
(c) Diotec Semiconductor AG http://www.diotec.com/
3
TGL34-6.8 ... TGL34-200CA
120 [%] 100 100 [%] 80 80 tr = 10 s
60
60 PPPM/2
IPPM/2
40 IPP 20 PPP 0
1
40 IPP 20 PPP 0 TA 50 100 150 [C]
1
0
tP 0 t 1 2 3 [ms] 4
10/1000s - pulse waveform 10/1000s - Impulsform
Peak pulse power/current vs. ambient temperature ) Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1)
10
2
[kW] 10
1 PPP 0.1 0.1s tP 1s 10s 100s 1ms 10ms
Non repetitive peak pulse power versus pulse width (10/1000 wave form) Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls)
The range of type numbers is graded to the international E 24 standard. The standard tolerance of the breakdown voltage for each type is 10%. Suffix "A" denotes a tolerance of 5% for the breakdown voltage. e.g.: TGL34-51C = bidirectional diode, VBR = 51 V ( 10%), VWM 41.3 V at ID = 5 A TGL34-9.1A = unidirectional diode, VBR = 9.1 V ( 5%), VWM 7.7 V at ID = 50 A
Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der Abbruchspannung jedes einzelnen Typs betragt in der Standardausfuhrung 10%. Suffix "A" kennzeichnet eine Toleranz der Abbruchspannung von 5%.
1
Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschluss http://www.diotec.com/ (c) Diotec Semiconductor AG
4

▲Up To Search▲

Price & Availability of TGL34-10

	To Download TGL34-10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .